I am using packaged water cooled chillers on the diff floors and cooling towers on the terrace.how would a vfd pump operate if used in the primary circuit ie to pump the water from the diff load to the cooling towers?. what changes need to be made to convert a 10 seer to a 13 seer. i work for a 55 and over property and i will be replacing the cooling unit

sir,i am a mechanical engineer i am doing my final year project in energy auditing in boilers and diesel generator sir if you send me the procedures and manuals and some guidelines to this project means it will be more helpfull to us I am a Civil Engineer in the water and waste water engineering field and I wish to train myself to offer residential energy audit services.

The easy answer is between $50 and $60--for the most part. Obviously, a little 36' ranch with no options isn't going to be the same price as a 76' long tri-level with $16,000 worth of options. We build both, though. This question is actually a little misleading, though. A site-built home often costs around $100 per sq. ft., or more--but that includes the foundation, on-site plumbing, and hookups. When you add these things to our homes the sq. ft.

Because the waste is a fuel and some facilities have permit limitations or tighter operational constraints on Higher Heating Value of waste. The BTU value determines how waste is processed.

of are homes are custom design. We prebuild on our site, disassemble and then reassemble on your subfloor. We have a large varity of plans but in most cases they are modified to your preferance. Back to Top

This is by far the most asked question and the most difficult to answer. There are just too many variables. A simple rectangular home without many interior log walls would be considerably less per square foot for a similar size home with interior log walls, additional corners, stairs and handrails, etc.

BTU stands for British Thermal Unit. It is the industry standard unit of measurement for heat quantity. 1 BTU is the amount of heat required to raise the temperature of one pound of water at its maximum density by 1 degree Fahrenheit:

There are several factors involved in determining the correct size(s) of equipment for your home. A heat loss calculation should be performed in order to determine the appropriate model(s). The quality of home construction (insulation values), number & size of windows and doors, and number of off-peak hours available are all factors involved in making this determination. Contact you local Power Company or dealer to obtain a heat loss calculation. Return to index

Equals a square 12 inches on each side and can be any thickness. It is typically used to measure engineered panel products that are less than 1" thick, including plywood, particleboard, medium density fiberboard and oriented strand board.

Wash the feet every day and allow them to dry properly before putting on shoes and socks. You should use a separate towel to dry your feet. To avoid passing the infection on you should not share these towels with anyone else. Wear socks made of cotton or wool, and change them at least twice a day or when they have become damp.

I have a 3300 square foot house that is a rectangle and has equal footage up stairs and down. I am converting from electric heat to a propane forced air heating unit to save on energy efficiency. How can I determine the amount of btu's the furnace should be able to put out? Faifly tighly constructed house pretty well insulated and we live in a moderate climate in northerrn California.

While we wish we could easily answer this question and give you a range, there are simply to many variables involved in each project to quote by square foot. We take many things into consideration when quoting our jobs such as complexity of form (inlayed objects, integral sinks, knockouts, etc.), technique (poured-in-place vs. precast), logistics (travel time to job site, level of protection of job site, etc.), and size of job.

The estimated sq. footage is approximately 1,200 sq. ft. Both Villas include 2 bathrooms, 2 bedrooms, living room, den, dining room, a fully equipped kitchen, and a patio with barbeque & ocean views.

Every project is different. In order to generate your quote, many factors need to be taken into account. However, by contacting our friendly technical team we can quickly provide you with a detailed estimate.

That depends on the size and style of the home as well as the materials and finishes chosen. For example, did you know that a single-level home generally costs more per square foot to construct than a multi-story house? Also, the cost per square foot decreases as the size of the home increases. Lancaster Craftsmen Builders has built homes ranging from the low $100s to over $200 per square foot. We can help you determine how much to budget, once we've discussed what type of home you have in mind.

Please refer to the chart below. To calculate the square footage of your flowerbed simply multiply the length times the width. For instance if the bed was 20 feet long by 2 feet wide the square footage would be 40. If you used tulips for this bed you would need 5 per square foot for a total of 200 tulip bulbs.

No. Every project is different with the prices varying according to project type, medium, difficulty of installation, etc. We encourage you to call for pricing information. You can not put a square foot price on art. It is not wall or floor covering. It is for the most part a permanent fixture that expresses not only the personality of the artist but of the owners for which it was designed. We can provide estimates, but only after we have the answers to certain questions.

Pricing houses by the square foot is like pricing cars by the pound. It is not a good measurement of “what you get,” and usually is not a guarantee of anything. Because we are a custom homebuilder and serve a wide geographical region, we do not price our houses by the square foot. Your cost per square foot will vary largely based on three factors: The total square footage (larger homes = lower cost per square foot) and the features you design into your home.

When you order from our web site you input numbers of tiles that you want. The prices are specified next to the pictures by both tiles and by sq. ft. Each tile is 2.69sqft.

Square foot pricing is the worst and most inaccurate way of comparing builders & housing value. There are thousands of items in a house and hundreds of hours labor. Something as simple as the finish on a faucet, or the type of wood used in the bath vanity cabinet can raise the price of the bathroom. Also, window design and configuration, whether or not the home has a fireplace, etc. all affect the square foot price.

For the same reason that new cars are not priced by dollars per pound, the most fair answer is: It depends. While the amount of stone required for your project is a significant part of the price, there are other variables. For this reason, we prefer to first understand the variables of your project and then issue a prompt preliminary estimate. We are careful to avoid any appearance of bait and switch marketing that can occur on the low end of our marketplace with square foot pricing.

This cooler have two compartment one upper compartment is used for RED wine and other half for WHITE wine. we want to keep RED AND WHITE wine at different temperature, Is it possible to do so ??? is there any provision I am trying to assess HVAC needs for a 10000 sq ft basement that I plan on developing as a commercial fitness center, and a 5000 sq ft subbasement that will become the locker rooms. The facility is an empty shell, however, does run quite warm even on the coldest days.

The total square footage includes all of the area inside the exterior face of the "heated walls". It does not include garages, porches, bonus rooms, or decks. For this reason, you cannot multiply the listed dimensions of each room, add them together and come up with the total square footage because you are not including hallways, closets, etc. Sorry, but no. In addition to the home plans that you order, you will also need a site plan that shows where the home is going to be located on the lot.

Truthfully, that can only be best done if the entire floor plan of the home, insulation value and needs are all considered. It is always best to speak with a dealer, tell them about your home, life style and describe what your goals are for heating with wood.

Normal healthy people are not usually at risk for VRE infection. The following precautions are recommended:

Please complete the feedback form on our Contact page and we'll be glad to visit your home and give you an exact quote.