If using a semi-transparent stain, like DEFY, apply only as much stain as the wood can easily absorb and take care to brush out any puddles that may form. If you put enough stain on to form a gloss on the surface, it has been over applied and will, more than likely, in time, peel. The Spring and Fall certainly offer the easiest conditions to work in.

Peeling is generally a sign of a lot of excess film on the surface and not enough penetration. This could be due to surface contamination, high moisture content in the wood, a previous stain not allowing the new stain to penetrate, or a wet on dry application instead of wet on wet.

We recommend a two coat application. For a more transparent look, add up to 1 pint of water per gallon of stain for the second-coat application.

I prefer to use a large brush or a mop. You want to get large amounts of Stain Solver liquid on the deck surface. Hand pump sprayers often apply too little solution to the surface. If you must use a sprayer, make sure the product has dissolved completely or you will clog the nozzle! Also, be sure you spray on lots of liquid.

When you're looking for a painted-kind-of-look to match you home exterior, or when the deck has been totally neglected, solid stains hide and conceal any cosmetic imperfections that the lumber may have.

Although, in some cases, Weatherall's chinking and caulk have been successfully applied over oil or solvent based stains, due to our inability to accurately determine the actual condition of the oil finish on a particular project, it is not recommended. The oil or solvent based system should be completely removed by power washing, chemical stripping, corn blasting, and/or sanding and a minimum of two coats of UV GUARD? or UV GUARD? ll Exterior Wood Finish applied.

Ans: The insulating additive will help keep the deck cooler while providing a slightly slip resistant surface.

Aesthetics: Clearly the outside of your home is a great source of pride. Having a manicured lawn and beautiful, clean deck allow for a great outdoor living experience. Entertaining, cook outs with family and friends on clean, protected surfaces create joyful memories that last for years to come. The best way you can protect your deck is power wash cleaning and professionally applied protection products.

All of our products are high end. Certain products will do better then others depending on your particular environment or type of wood that you have. If you came to our store looking for a certain brand name then we would suggest sticking with that. Please email us if you have any questions and we will be more then happy to suggest a certain brand depending on your situation.

That's an opinion call, but if you do, you will have to do it again every year. We recommend letting it grey naturally and washing it 2 or 3 times/year with Sunlight dishwashing soap to keep it clean and pollution-free.

Creative Wood Products has their own private label stain called Deck Gold. Deck Gold is an oil based semi-transparent sealer and stain in one. It is a unique blend of resin, pigment oil, mildewcide and UV protectors that penetrate deeply into the wood to protect and preserve it. Deck Gold can be used on all types of wood except Redwood. We also carry Superdeck Products, Superdeck is a natural oil, transparent stain designed to maintain the beauty of your wood.

You should certainly protect your deck from unnecessary moisture intrusion and the harmful effects of the sun's ultra-violet rays. Use of a penetrating stain, containing water repellant ingredients in most cases will protect your deck best. The pigment in the stain will absorb the ultra-violet rays from the sun and protect the wood fibers from degradation. In most cases a stain will need maintenance every 2-4 years while clear sealers require maintenance every 1-2 years.

Yes. You would need to send us a sample (on wood) of the color that you would like to match and we will have our finishers formulate a finish for you. We would send you the sample of the finish on the wood that your cabinet would be made from for your approval. There is an up charge for this service. The amount would be determined by the type of finish and the number of steps that it takes to achieve it.

No, not without proper surface preparation. Recommendation is to clean surface and remove previous finish, usually by use of a pressure washer or sanding.

Yes, provided the previous finish has sufficiently weathered to allow penetration of UV Plus. For best results, clean the surface with WD Wood & Deck Renewer, Wood & Deck Cleaner and Brightener, or sand to a new surface.

Yes, provided that the surface is sound and clean. Remove any flaking or peeling previous finishes. Do not apply over freshly stained projects or over coatings with stearates, waxes, silicones or teflon.

Normally BST stain is applied by hand one brick at a time. However, we use several different techniques such as sponging, spraying, etc. to achieve a perfect match. The application process differs for each surface so the most effective technique will be determined on a per job basis.

Sure can! We can change your deck's color and look from red to blue. This is only available in staining products.

First, ask yourself, what do you want your deck to look like? If you like the natural beauty of wood, look for a clear or woodtone penetrating finish. These finishes enhance wood's grain and character while providing protection from water and the sun's UV rays. Expect the finish to last 2-3 years. If you want to add a touch of color but still want to see the grain of the wood, then a semi-transparent finish is what you need.

You don't. How long a finish last depends on its clarity and how it is applied. The sun's UV rays penetrate the finish and breakdown the surface of the wood beneath. Darker and more opaque finishes prevent the rays from penetrating and the finishes last longer. Quality clear and wood tone finishes can be expected to last 2-3 years. Semi-transparent finishes (those that have a color but allow the wood grain to show through) will last 3 or more years.

No. Nearly all stains contain a waterproofing additive, which is just as effective as that used in waterproofing sealers. Often, application of a waterproofer over a stain is counterproductive because the surface is no longer porous enough to accept the waterproofer.

Even though the lumber may be kiln-dried before treatment, using water-borne preservatives restores moisture to the wood. Too much moisture in the wood may prevent the stain or paint from penetrating the wood sufficiently. It is best to test the wood by painting or staining a scrap piece to see if it applies properly. If not, wait until it does. A water repellent should be applied annually. Do not use latex paints. Semi-transparent, oil-based stains work best.

On a horizontal surface, Penofin may be expected to perform for an average of 9-18 months and 3-5 years on a vertical surface. The time will vary depending on the percentage of sunlight, weather, etc... Yes. All Penofin wood finish colors contain the same ingredients, just different amounts of colored pigments. However, you will not be able to make the surface lighter by applying a lighter shade. As always, you should test a small area before use.

No, "New Wood Defender" is recommended on pressure treated wood, as well as Cedar and Redwood during the first year of weathering. Wood Defender is a latex based product used to stabilize new exterior wood. This product is treated with fungicide to prevent the growth of mildew.

Unfortunately, the answer is no. The old stain will need to be removed before a new finish can be applied. Look for an outdoor stain remover designed to work with both oil and acrylic finishes. Stripping the deck is not difficult but be sure to follow the label directions closely. Once the deck has been cleaned down to the bare wood, apply the clear, woodtone, semi-transparent or solid color finish of your choice.

Wool is naturally stain-resistant. We do not have a stain-resistant agent applied. If you wish, you can have a local carpet cleaner apply a stain-resistant treatment.

No, not without proper surface preparation. Recommendation is to clean surface and remove previous finish, usually by use of a pressure washer or sanding.

Acceptance letters are usually mailed to your home address within three weeks of your application being processed. You may also contact the TCC Information Center to check your application status.

When you have finished answering all of the vacancy-specific questions and have selected the "Finish" button at the bottom of the last screen, a screen will appear that says, "Your application has been successfully transmitted!" If you have completed the registration process, and submitted a resume, then you have completed the online application process for this vacancy.